Skip to content
Now Shipping Worldwide

Privacy Fence Planning Checklist for Homeowners

TL;DR

  • Work in order: goal, layout, local rules, panel type, gates, colour, sample, quote.
  • PrimeAlux lists three panel options. Privacy is solid, Semi-Privacy has 13 mm gaps, and Privacy Plus is reinforced.
  • For anything about permits, height or setbacks, check your local bylaw.

Most fence problems start with a step that was skipped, usually a measurement or a local rule. This checklist puts the steps in the order that avoids rework. Each step is short.

Wood-grain aluminum fence turning a corner around a lawn, with a gate set into the run
A fence run with a corner and a gate. Both need to be planned before the panels are ordered.

Your planning steps

Tick items off as you go. Your ticks stay in this browser and are never sent.

1. Decide what the fence is for

Write down the main job. It may be blocking a view, containing a dog, screening a pool or a utility area, or defining a boundary. The answer drives the panel choice later.

2. Map the layout

  • Measure each run and note where it turns.
  • Mark the gate positions and which way each gate swings.
  • Note slopes, trees and anything buried or overhead.

Have underground services located before anyone digs. If the ground slopes, send your measurements to our sales team and ask how the panels will sit.

3. Check local rules

Height, setbacks, permits and property lines are set locally. Check your local bylaw, and confirm the position of your property line before you order.

Get a quote

Ready to price this out?

Send us your measurements through the contact form or call (437) 333-3032.

Open the contact formCall (437) 333-3032

4. Choose the panel type

PanelWhat the product page lists
PrivacyFully closed, slat-to-slat, 100 × 20 mm slats, no sightlines
Semi-Privacy14 slats per panel with 13 mm spacers, reduced sightlines and airflow
Privacy PlusOverlapping slats with an H-profile reinforcement, 8 ft sections

All three use 80 × 80 mm aluminum posts and can be mixed on the same post system. Listed sizes are 6 ft high by 6 ft wide for Privacy and Semi-Privacy or, in vertical slats, 6 ft high by 8 ft wide. 8 ft wide sections are available in Privacy Plus. For a longer comparison, read Privacy vs. Semi-Privacy vs. Privacy Plus.

Compare the three panel types

Choose a tab to compare the three options.

Privacy

What the product page lists
Fully closed, slat-to-slat, 100 × 20 mm slats, no sightlines

Semi-Privacy

What the product page lists
14 slats per panel with 13 mm spacers, reduced sightlines and airflow

Privacy Plus

What the product page lists
Overlapping slats with an H-profile reinforcement, 8 ft sections

5. Plan the gates

Brown horizontal-slat fence with a walk gate set into the run, beside a stone curb
A walk gate set into a fence run.

Gates are 28 in and 44 in wide, with a non-welded frame fastened with screws and brackets. The kit includes posts, heavy-duty hinges and a latch. Latch details are available upon request. See the aluminum gates page.

Key facts

  • Height, setbacks, permits and property lines are set locally. Check your local bylaw, and confirm the position of your property line before you order.
  • All three use 80 × 80 mm aluminum posts and can be mixed on the same post system.
  • Free samples are available.

6. Pick the colour and orientation

There are four standard colours, and the slats run horizontal or vertical. Look at both in the yard, not only on a screen.

7. Get a sample

Free samples are available. Hold one next to your house and look at it in daylight, at more than one time of day. Ask what the sample represents, because one sample may not show the slat spacing or the reinforcement.

Free samples

Want to hold the finish before you decide?

Free samples are available. Ask for one through the contact form.

Ask for free samplesCall (437) 333-3032

8. Ask for a complete quote

A quote should name the panel type, size, colour and orientation, say what the kit includes, and show delivery separately. Shipping is calculated after you contact our sales team. The Privacy panel specification recommends a 15 cm concrete foundation, and Semi-Privacy lists a minimum 15 cm concrete layer under the base plate, so ask whether that is covered.

When you are ready, contact us with your sketch and measurements.

Frequently Asked Questions

Do I need a permit for a privacy fence?

That depends on your municipality and on the fence height. Check your local bylaw before you order.

Which panel is best for full privacy?

The Privacy panel is fully closed, slat-to-slat, with no gaps. Privacy Plus is also solid and adds reinforcement for 8 ft sections.

Semi-Privacy has a 13 mm spacer between slats and is not designed for complete privacy.

Can I mix panel types?

Yes. The product pages state that the post and rail system is compatible across all three fence types.

What should I send to get a quote?

Send a sketch of the fence line with measurements, the gate positions, the panel type you prefer, and your postal code for shipping.

  • Note slopes or obstacles along the line.
  • Say whether you want pickup or delivery.

This article is general planning information. Product specifications come from the PrimeAlux product pages and may change. Confirm dimensions, mounting and installation details with PrimeAlux before ordering, and check your local bylaws and permit requirements. This is not engineering or legal advice.