Skip to content
Now Shipping Worldwide

What Comes in a PrimeAlux Fence Kit

TL;DR

  • The panel kit arrives in one box that holds the slats and the rails.
  • The posts ship separately, and the post length depends on the panel height you choose.
  • For quantities, tools and fastener counts for your job, ask our sales team.

Before a fence goes up you need to know what arrives and in how many pieces. This post explains how the PrimeAlux kits are listed, what comes in the box and what ships on its own, and what to confirm with sales before you order.

A run of dark horizontal aluminum fence panels set between posts along a lawn, with a yellow fire hydrant beside the fence
Dark horizontal panels between posts. The kit is the posts and panels that make up a run like this.

How the kits are listed

The Privacy product is a "Privacy Aluminum Fence Panel Kit Including Posts & Panels". Semi-Privacy and Privacy Plus are sold as the same kind of kit. You choose the fence panel option, the height and width, the standard fence colour and the slat orientation. A custom size goes through direct contact with our sales team. 8 ft wide sections are available in Privacy Plus.

Shipping is calculated after contact with our sales team, so plan on a quote rather than a delivered total from the listing.

One box, and the posts on their own

The panel kit comes in one box. That box holds the slats and the rails. The posts do not travel in it. They ship separately, and the length of the post depends on the height of the panel.

Line drawing of a square post with four stacked slats attached at its side, on a base plate
Line drawing of slats on a post.

Two things follow from that. Settle your fence height before you count posts, because the height decides which post you need. And when your order arrives, expect more than one piece: the box of slats and rails, and the posts. Check each against your order before anyone starts work.

Free samples

Want to see the parts in person?

Free samples are available. Ask for them through the contact form or call (437) 333-3032.

Ask for free samplesCall (437) 333-3032

Parts named in the Quick Specs

PartQuick Specs wording
Posts80 × 80 mm extruded aluminum posts (Privacy and Semi-Privacy); 80 × 80 mm aluminum posts (Privacy Plus+)
RailsReinforced top and bottom extruded aluminum locking rails (Privacy); top and bottom extruded aluminum rails (Semi-Privacy); reinforced top and bottom locking rails (Privacy Plus+)
Slats100 × 20 mm; Semi-Privacy has 14 slats per panel and a 13 mm spacer between slats
Base and anchorsSemi-Privacy: base plate bracket, expansion screw anchor bolts
H profilePrivacy Plus+: reinforcing H profile

For the base, the Privacy page lists "15 cm concrete foundation recommended" and the Semi-Privacy page lists "Minimum 15 cm concrete layer under base plate".

Key facts

  • The panel kit comes in one box. That box holds the slats and the rails.
  • The posts ship separately, and the post length depends on the panel height you choose.
  • Settle your fence height before you count posts, because the height decides which post you need.

The four install steps

  1. Base anchors down: mark, drill and secure your base plates.
  2. Post goes in: align and tighten the main posts.
  3. The rails go up: feed each slat through the channels for a tight fit.
  4. Lock it all in: screw in the caps and end plates for a perfect finish.

Download the Installation Manual PDF from the product page and read it before you order, so you know the work you are signing up for.

The four install steps

Tick items off as you go. Your ticks stay in this browser and are never sent.

What to confirm before you order

Line drawing of a square post on a base plate set on a concrete block, with a rail running off to the side
Line drawing of a post on a concrete base.

Ask our sales team for the quantity of concrete, the tool list and the count of fasteners per panel for your job. That information is available upon request. Step four mentions caps and end plates, so ask how many come with your order. Ask, too, whether fasteners are part of the kit.

Before you call, measure your run and note where it ends and where it turns a corner. Those numbers decide how many panels and posts you need.

What to send our sales team

Send the run length in feet, the panel option and slat orientation you are considering, the fence height and the width you want. Add a photo of the site, your city and province, and whether you are a homeowner or a contractor. Use the contact page, and see our fence panel quote checklist for more to include.

Copy my details for sales

This sheet lists what the post asks you to send our sales team.

  • Customer type
  • City and province
  • Run length in feet
  • Fence height
  • Fence width
  • Panel option you are considering
  • Slat orientation
  • Anything else we should know

This sheet builds text in your browser. Nothing is sent or saved. Copy the text into your message or email to us.

Get a quote

Ready to count what you need?

Send the run length and the panel option through the contact form, or call (437) 333-3032.

Open the contact formCall (437) 333-3032

Frequently Asked Questions

Are posts included in the kit?

The listing is a kit "Including Posts & Panels". The posts ship separately from the box that holds the slats and rails, and their length depends on the panel height.

Is concrete included?

Ask our sales team before you plan your budget. The Privacy page lists "15 cm concrete foundation recommended".

What tools do I need?

The install steps involve marking, drilling, aligning, tightening and screwing. Ask our sales team for the full tool list.

Is there an installation manual?

Yes. You can download the installation manual PDF, and the fence pages also say "See The Installation Manuals".

Do I need a permit?

Rules vary by municipality. Check your local bylaw.

This article is general planning information. Product specifications come from the PrimeAlux product pages and may change. Confirm dimensions, mounting and installation details with PrimeAlux before ordering, and check your local bylaws and permit requirements. This is not engineering or legal advice.